ISO B FHK and DS Series


Description

FHK Series sockets incorporate valves in both socket and plug halves to prevent fluid loss when the socket is disconnected. These sockets are normally referred to as “hydraulic couplings”, but they are used extensively with other media where objectionable.

Features

Applications

FHK Series sockets incorporate valves in both socket and plug halves to prevent fluid loss when the socket is disconnected. These sockets are normally referred to as “hydraulic couplings”, but they are used extensively with other media where objectionable.

Vacuum Service

27" Hg. maximum. Rated pressures as defined by ANSI/B93.2-1986 based on 4:1 Safety Factor and non-shock service.

Type

FHK, Two-Way Shutoff, Both socket and plug are sealed at disconnect.

Interchangeability

Standard, most widely used, industrial interchange design. Within each series, only sockets and plugs of the same size will couple together. Compatible with ISO 7241-1, Series B.

Operation

Manual - Socket sleeve must be manually retracted to connect and disconnect. Connect and disconnect at zero pressure for personal safety and maximum product life.

Seal Compound

Standard seals are Buna-N.

Options

  • One Way Shut-Off: Add suffix VA to either socket or plug catalog number for valve actuator.
  • Straight-Thru: Add suffix LV to both socket and plug catalog number for less valve.
  • Ball Lock (BL): Locks against accidental disconnect. To connect, align ball with slot. After connection, rotate sleeve to lock. To disconnect, realign ball with slot and retract sleeve.

Ordering Information

FHK Series couplings are available in RoHS compliant plated steel, brass, and 303/316 Stainless as standard. Brass couplings have double O-Ring seals (excluding 1/8") and stainless locking balls. Standard seals are Buna-N (Nitrile). Consult factory for optional seals.

All sizes can be furnished with locking sleeves designated by “BL” (Ball Lock) prefix after regular catalog numbers.


Connect and disconnect at zero pressure for personal safety and maximum product life.